2021-2024 Ford Bronco Heat Extractor Hood

Our aftermarket heat extractor hood for 2021-2024 Ford Broncos are handcrafted right here in America to ensure the kind of quality, durability, and craftsmanship you’ve come to expect from Advanced Fiberglass Concepts. Each Ford Bronco hood is made specifically for your model and year and designed for a seamless transition between the factory panels and our aftermarket body panels. This Bronco fiberglass hood vent is perfect match with our 2021+ Ford Bronco Sasquatch Flares. Carbon Finish Options are in the vent section only. Purchase thisBronco aftermarket hood online!

• Heat-extractor hood
• Fiberglass hood is hand-laid in America to ensure quality
• Molded specifically to replace Bronco hood
• Designed to be long-lasting even during the toughest rides and climates
• Made in the USA
• Comes standard in semi-gloss white
• Part Number: AFC 178 (Fiberglass), AFC 178-CFV (Carbon Fiber Vents), + AFC 178-FCFV (Forged Carbon Fiber Vents) 

Ford Bronco
2021 - 2022 - 2023 - 2024

INSTALLATION INSTRUCTIONS - Hood

All of our products are fairly easy to install. You will need a few hand tools and a few hours of time, depending on the products you have purchased. Advanced Fiberglass Concepts LLC does recommend that a professional install for a seamless fit install these products.

Tools required for most install:

Socket set

Step 1: Open stock hood and remove bolts holding the hood down.

Step 2: Remove stock hood from vehicle. 

Step 3: Test fit our aftermarket hood by resting it on the hinge plates. Align it on each side to have appropriate lines. Keep in mind that the hood will sit high if it is not bolted down. 

Step 4: Open the hood, tighten the bolts on the hinge plates to fasten the hood down and close the hood.

Step 5: After closing the hood, it may require to be adjusted to get appropriate lines. Start by opening the hood to loosen the back hinge plate bolts and close the hood. Pull the hood in the direction you would like (To help make the body lines consistent from driver to passenger side). Slightly open the hood (Make sure to not move it otherwise you will need to restart this step) and tighten the back hinge plate bolts (using the factory nuts) 

Step 6: Repeat step 5 for the front latch with M6 bolts to tighten the hood in place. 

You will need to be patient to get a good fit. If the hood sits too low or too high in the front, you can adjust it by turning up or down the rubber height adjuster at the front of the hood located in the core support, or hood. If you need to adjust the back of the hood then loosen the three bolts that are holding the hinge plate to the chassis and push the hinge plate mechanism down and tighten the bolts. This will pull the back of the hood down to align with the fenders. 

These instructions are useful for all hoods sold by Advanced Fiberglass Concepts.—therefore some of the steps may not be needed or should be slightly altered to suit your particular vehicle and product needs.

Thank you for purchasing our product(s). We hope you are satisfied with the final result.

We do our best to have as much inventory as possible. However, if they are not in stock, then our lead-times are normally 2-4 weeks from order date. Please contact us through live-chat, email, or phone to check inventory and current lead-times.

All our products are shipped through LTL Freight carriers. Shipping prices are calculated in the checkout area. Our products can get expensive to ship because we ship all our products with premium LTL Freight carriers to ensure they are not damaged (All orders are insured in case of potential shipping damages). Other factors that control the shipping cost are the size of the package, weight, overall destination, and nature of the product (Fiberglass), which all play a large role in shipping costs. To help cut down the shipping cost, ship to a commercial address.

The panels are made from fiberglass (or carbon fiber if requested at an additional cost). We use a proprietary blend of polyester resin which is paired with our fiberglass mat and cloth. This combination of resin and fabric provides the strength and flexibility to make our body panels a superior product.

Products come semi-gloss white unless requested in a specific gelcoat color. We do not offer color matching services. All gelcoat colors are generic colors and will not be an exact color match. Any body shop in your local area can color match our products. All products require prep work for paint.

All products require professional installation. Minor adjustments may be necessary. These are normal bodywork prep and installation steps and therefore NOT considered to be defective. Defective products must be brought to the attention of ADV Fiberglass within 20 business days of receiving the parts. Pictures are required to display true defects on the products prior to return. Any defects found beyond 30 days of receipt are no longer eligible for exchange or return. Issues found that are not directly caused by a manufacturing defect are not covered under any warranty offered by ADV Fiberglass (examples: acts of nature, neglect, misuse, imperfect weave, third-party mechanical, heat or any other damage inflicted by improper use of the products). This includes, but is not limited to, improper handling, improper installation by unauthorized dealerships or mechanic shops, damage inflicted by improper shipping, storage, or use of said parts. The warranty also does not cover any damage resulting from usage in unsafe environments, eg. Off-roading. To qualify for warranty coverage, all items must be inspected prior to accepting delivery. Any damage found during delivery inspection must be reported to the carrier before accepting delivery. If damages are reported after delivery, no warranty or coverage will be offered. ADV Fiberglass is not liable for any damages or injury as a result of the use of its products. Rest assured, we are known to provide the strongest and best fitting parts in the industry.

Advanced Fiberglass Concepts customer guarantee is that you can return your item within 30 days (20 business days) of receipt as long as it is returned in the original packaging and you pay for all shipping charges; original shipping fees are non-refundable. Products are non-refundable if mounted or altered in any way. Extra fees may be incurred for proper fitment and finish. Refunds will not be issued due to minor fitment or finish issues. All refunds are processed in 30 days (20 business days) after the order is returned. All orders have a 35% restocking/cancellation fee. All order(s) will be issued a restocking fee if the product(s) have begun production. No refunds, returns, or exchanges on wire transfers, rush orders, sale pricing, deposits, custom orders; carbon fiber, colored gel coat, and more. For all installs, we are not responsible for damages/malfunctions on aftermarket parts (Such as headlights, bumpers, and much more). More information about our refund policy.